Search specific job titles, aliases, work contexts, or fields. Every card opens a full occupation page and points to its career family and practical learning connections.
Families organize the directory without pretending that one broad pathway is a specific occupation. Choose any family to narrow the published list below.
Power plant operators run and monitor the boilers, turbines, generators, and auxiliary systems that produce electricity. Most of the shift is spent watching instrumentation from a control room and walking the plant to check equipment by sight, sound, and touch. When something drifts out of range the operator has to decide quickly whether to adjust, isolate, or shut down.
Certificate or college diplomaUtilities, energy, mining and resources
Nuclear power reactor operators control the reactor and its supporting systems from a licensed control room, holding reactivity, coolant flow, and power output inside strictly defined limits. The role is built around procedures, verification, and peer checking rather than improvisation. Training, requalification, and simulator testing continue for as long as someone holds the position.
Varies by employer or jurisdictionUtilities, energy, mining and resources
Substation technicians install, test, and maintain the transformers, breakers, switchgear, and protection relays that step voltage up and down across the grid. The work happens around high-voltage equipment, so isolation, grounding, and permit discipline matter as much as technical skill. Fault call-outs can mean working outdoors in poor weather at unsociable hours.
ApprenticeshipUtilities, energy, mining and resources
Power system operators run the transmission or distribution network from a control centre, balancing generation against load and keeping voltage and frequency inside operating limits. They authorise switching, direct field crews during outages, and coordinate restoration after faults. Decisions are made under time pressure with consequences that reach well beyond the control room.
Certificate or college diplomaUtilities, energy, mining and resources
Water treatment operators run the processes that turn raw source water into water safe to drink, then keep it moving through the distribution network at the right pressure and residual. The job mixes chemistry, pumps and valves, sampling, and a great deal of record-keeping for the public health regulator. Plants run continuously, so shift and on-call coverage is normal.
Certificate or college diplomaUtilities, energy, mining and resources
Wastewater treatment operators run the screening, settling, biological, and disinfection stages that clean sewage and industrial effluent before it is discharged or reused. Much of the skill lies in reading how the biological process is behaving and adjusting aeration, return sludge, and chemical dosing before consent limits are threatened. Conditions can be wet, odorous, and physically demanding.
Certificate or college diplomaUtilities, energy, mining and resources
Gas utility technicians install, inspect, and repair the mains, services, regulators, and meters that deliver gas to homes and businesses. A large share of the work is responding to reported leaks and odour calls, where the first job is to make the situation safe. The role is mobile, weather-exposed, and carries on-call obligations.
ApprenticeshipUtilities, energy, mining and resources
Meter technicians install, exchange, test, and repair the electricity, gas, or water meters a utility bills from. Accuracy is the whole point of the role, so calibration records, seals, and correct wiring or pipework matter more than speed. Most of the day is spent travelling between customer premises and working alone.
Certificate or college diplomaUtilities, energy, mining and resources
Wind turbine technicians maintain, inspect, and repair the mechanical, hydraulic, and electrical systems inside turbines, usually after climbing or riding a lift to the nacelle. The work is a mix of scheduled servicing and unplanned fault call-outs, done at height and in weather that decides whether the day happens at all. Rescue and working-at-height training is part of the job, not an add-on.
Certificate or college diplomaUtilities, energy, mining and resources
Solar photovoltaic installers mount panel arrays on roofs, frames, or ground structures and connect them through inverters into a building's electrical supply or the grid. The job combines roofing-style physical work with careful electrical and structural detail, since a poor penetration or a loose termination shows up years later. Final connection work is often reserved for a licensed electrician.
Short course or on-the-job trainingUtilities, energy, mining and resources
Energy auditors survey buildings or industrial sites to work out where energy is being used and wasted, then set out the measures that would reduce it. The role pairs site work such as blower door tests and equipment inventories with modelling, calculation, and report writing. Findings have to be defensible, because clients spend money on the strength of them.
Certificate or college diplomaUtilities, energy, mining and resources
Renewable energy technicians install, commission, and maintain generation and storage equipment across solar, wind, hydro, biogas, and battery sites. Because the technologies differ, the constant is the technician's ability to read schematics, follow commissioning procedures, and fault-find across mechanical, electrical, and control systems. Sites are often remote and visited on a route rather than staffed continuously.
Certificate or college diplomaUtilities, energy, mining and resources
Oil and gas production operators run the wells, separators, compressors, and tanks that bring hydrocarbons to surface and prepare them for transport. Days are spent driving a route of sites or working a shift on a facility, taking readings, adjusting equipment, and dealing with whatever has gone wrong overnight. Sites are frequently remote, and rotational schedules or camp work are common.
Certificate or college diplomaUtilities, energy, mining and resources
Drilling rig operators control the drawworks, rotary system, and mud pumps that advance a well, and direct the crew working on the rig floor. Reading what the drill string is doing through weight, torque, and pressure indications is a large part of the skill. The work is physical, noisy, done on rotational shifts, and usually away from home.
Short course or on-the-job trainingUtilities, energy, mining and resources
Well service operators work on wells that are already drilled, running the service rigs and equipment used for workovers, completions, pump changes, and abandonment. Every job is different because the well's condition, pressure, and history drive the programme. Crews travel between sites, work outdoors in all conditions, and rig up and down frequently.
Short course or on-the-job trainingUtilities, energy, mining and resources
Pipeline controllers operate long-distance oil, gas, or product pipelines remotely from a control centre, starting and stopping pumps or compressors and setting flows to meet delivery schedules. The core skill is recognising when instrument readings indicate a leak, column separation, or equipment problem rather than normal variation. Shifts are covered around the clock and decisions are documented closely.
Certificate or college diplomaUtilities, energy, mining and resources
Pipeline maintenance technicians look after the physical pipeline system in the field: valves, pump and compressor stations, cathodic protection, and the right-of-way itself. Work is spread along a route rather than concentrated on one site, so days involve a lot of driving and independent decision-making. Integrity findings feed directly into repair and inspection programmes.
Certificate or college diplomaUtilities, energy, mining and resources
Refinery process operators run distillation, cracking, treating, and utility units, splitting their time between a control room panel and outside rounds on the unit. They control temperatures, pressures, and flows to keep product on specification while staying inside safe operating limits. Start-ups, shutdowns, and upsets are the demanding parts of the job and are worked strictly to procedure.
Certificate or college diplomaUtilities, energy, mining and resources
Underground miners drive tunnels and extract ore below surface, operating drills, bolters, loaders, and haulage equipment in confined and dark conditions. Ground support, ventilation, and escape routes are constant considerations rather than background rules. Shifts are long, physically demanding, and often worked on a rotation away from home.
Short course or on-the-job trainingUtilities, energy, mining and resources
Open-pit mine operators run the shovels, excavators, haul trucks, dozers, and graders that strip waste and move ore on a surface mine. Much of the shift is spent alone in a cab following a dispatch system, with the challenge being consistency, spotting, and hazard awareness around very large equipment. Sites usually run continuously in all weather.
Short course or on-the-job trainingUtilities, energy, mining and resources
Mining technicians support the engineering and technical services side of a mine, gathering survey, sampling, and production data and turning it into the plans and reconciliations the operation runs on. The role moves between the pit or underground workings and a desk, and accuracy in the field determines whether the plan is any use. It is a common bridge between operating experience and engineering work.
Certificate or college diplomaUtilities, energy, mining and resources
Mineral processing operators run the crushing, grinding, flotation, leaching, and dewatering circuits that turn mined rock into a saleable concentrate or metal. The work is a continuous balancing act between throughput, recovery, and reagent use, guided by control screens, sampling results, and what the circuit looks and sounds like. Plants run around the clock and are noisy, dusty, and wet.
Short course or on-the-job trainingUtilities, energy, mining and resources
Drill and blast technicians design, load, and fire the blasts that break rock on mines, quarries, and civil projects. The work covers marking and checking drill patterns, handling explosives and initiation systems, and controlling the exclusion zone before firing. Explosives handling is tightly regulated and the role carries permit and record-keeping obligations wherever it is done.
Short course or on-the-job trainingUtilities, energy, mining and resources
Geological technicians collect and record the field and core data that geologists interpret, working on exploration programmes, operating mines, and drilling projects. Days alternate between field or core shack work and entering, checking, and tidying data. The role suits people who like being outdoors but are still meticulous about how a record is written down.
Certificate or college diplomaUtilities, energy, mining and resources
