Search specific job titles, aliases, work contexts, or fields. Every card opens a full occupation page and points to its career family and practical learning connections.
Families organize the directory without pretending that one broad pathway is a specific occupation. Choose any family to narrow the published list below.
Agricultural equipment technicians diagnose, repair, and maintain tractors, harvesters, sprayers, and the hydraulic, electrical, and guidance systems built into them. Work happens in a dealership workshop and out on farms, and the pace rises sharply during planting and harvest when a broken machine stops the whole operation. Modern machines mix mechanical, hydraulic, electronic, and software fault-finding.
ApprenticeshipAgriculture, animals and environment
Audio engineers capture, mix, and process sound for music, film, broadcast, podcasts, and live events. The work combines ears and equipment: microphone choice and placement, signal flow, gain structure, and the mix decisions that make a recording translate.
Certificate or college diplomaArts, design, media and communications
Electrical engineers design and verify the circuits, power systems, and electrical equipment that machines, buildings, and networks depend on. Work spans schematic capture and load calculations through to commissioning and fault investigation on installed equipment.
Telecommunications engineers design, deploy, and troubleshoot the networks that carry voice and data, including fibre, microwave, and mobile radio systems. Work moves between planning and modelling at a desk and commissioning or fault-finding at sites and exchanges.
Controls engineers design and program the systems that make machinery and plant run automatically, including PLCs, drives, instrumentation, and operator interfaces. Commissioning is a core part of the job, and it often happens during shutdowns or outside normal hours.
Mechatronics technologists build, commission, and maintain equipment that combines mechanical parts, electronics, sensors, and control software. The appeal of the role is that a single person follows a fault across all of those layers rather than handing it off.
Certificate or college diplomaEngineering and technical design
Electronics technicians build, test, calibrate, and repair electronic assemblies and instruments. Work ranges from bench fault-finding down to component level to field service on installed equipment, and it rewards methodical testing over guesswork.
Certificate or college diplomaEngineering and technical design
Instrumentation and control technicians install, calibrate, and repair the measuring and control devices that keep industrial processes within limits. The work is safety-critical in plants and utilities, and in several jurisdictions it is a designated apprenticeable trade.
Embedded software developers write the code that runs inside physical products, from appliances and vehicles to medical and industrial equipment. Memory, power, and timing are tight, and testing usually means working with real hardware on a bench.
Bachelor's degreeInformation technology, data and cybersecurity
Calibration technicians check and adjust measuring instruments and test equipment so that the numbers a plant relies on can be trusted. They work to documented procedures traceable to national measurement standards and record the as-found and as-left condition of every instrument. When equipment is found out of tolerance they help assess what work may have been affected.
Certificate or college diplomaManufacturing, production and quality
Industrial maintenance technicians keep production machinery working, covering planned servicing as well as breakdown repair. The work spans mechanical, hydraulic, pneumatic, and often electrical and control systems, so diagnosis is a core skill. Breakdown work can be pressured, because the line is usually stopped while the fault is found.
ApprenticeshipManufacturing, production and quality
Electricians install, alter, test, and repair the wiring, panels, and fixed equipment that carry electrical power through buildings and sites. Much of the day is reading drawings, running and terminating cable, and proving a circuit is safe before it is energised. Fault-finding on systems that are already live is a routine part of the work and carries genuine safety consequences.
ApprenticeshipSkilled trades, maintenance and repair
Industrial electricians keep the electrical side of plant and production equipment running: motor controls, drives, sensors, and the control panels that tie them together. The work leans heavily on diagnosis, because a stopped line has to be traced back to a cause quickly and safely. Shift coverage and callouts are common where plant runs around the clock.
ApprenticeshipSkilled trades, maintenance and repair
HVAC technicians install, maintain, and repair heating, ventilation, and air conditioning systems in homes and buildings. The role mixes mechanical work on compressors, fans, and ductwork with electrical and control troubleshooting, and it usually involves explaining findings to the person paying for the repair. Seasonal peaks and after-hours callouts are normal in service work.
ApprenticeshipSkilled trades, maintenance and repair
Automotive service technicians diagnose, service, and repair cars and light trucks across engine, driveline, brake, suspension, electrical, and electronic systems. Modern vehicles are heavily networked, so scan tools, wiring diagrams, and manufacturer procedures matter as much as hand tools. Explaining a diagnosis clearly to a customer or service advisor is part of the job.
ApprenticeshipSkilled trades, maintenance and repair
Heavy-duty equipment technicians maintain and repair the diesel-powered machines used in construction, mining, forestry, and agriculture: excavators, loaders, dozers, haul trucks, and similar equipment. The systems are large and high-energy, spanning diesel engines, hydraulics, powertrains, and electronic controls. A lot of the work happens in the field, at the machine, in whatever weather the site has.
ApprenticeshipSkilled trades, maintenance and repair
Marine service technicians maintain and repair boats and their engines, drives, electrical systems, and onboard equipment. Saltwater and constant vibration make corrosion and fatigue everyday problems, and a fault at sea has different consequences than one on a driveway. Work happens in yards, at docks, and sometimes on the water during sea trials.
Certificate or college diplomaSkilled trades, maintenance and repair
Appliance repair technicians diagnose and repair domestic and commercial appliances such as washers, dryers, refrigerators, dishwashers, and cooking equipment. Most of the work is in customers' homes or premises, so the job is as much about access, tidiness, and clear explanation as it is about the fault. Sealed refrigeration repairs bring additional handling requirements.
Certificate or college diplomaSkilled trades, maintenance and repair
Elevator mechanics install, maintain, test, and repair elevators, escalators, and other elevating devices. The trade sits at the intersection of mechanical, electrical, and control systems, and it is governed by safety codes and periodic inspection because the equipment carries the public. Entrapment and breakdown callouts mean on-call rotations are common.
ApprenticeshipSkilled trades, maintenance and repair
Powerline technicians build and maintain the overhead and underground networks that distribute electricity from substations to customers. The work is outdoors in all weather, at height or in trenches, and around conductors that can be energised at high voltage. Storm restoration means unpredictable hours and long shifts when the network is damaged.
ApprenticeshipSkilled trades, maintenance and repair
Substation technicians install, test, and maintain the transformers, breakers, switchgear, and protection relays that step voltage up and down across the grid. The work happens around high-voltage equipment, so isolation, grounding, and permit discipline matter as much as technical skill. Fault call-outs can mean working outdoors in poor weather at unsociable hours.
ApprenticeshipUtilities, energy, mining and resources
Meter technicians install, exchange, test, and repair the electricity, gas, or water meters a utility bills from. Accuracy is the whole point of the role, so calibration records, seals, and correct wiring or pipework matter more than speed. Most of the day is spent travelling between customer premises and working alone.
Certificate or college diplomaUtilities, energy, mining and resources
Wind turbine technicians maintain, inspect, and repair the mechanical, hydraulic, and electrical systems inside turbines, usually after climbing or riding a lift to the nacelle. The work is a mix of scheduled servicing and unplanned fault call-outs, done at height and in weather that decides whether the day happens at all. Rescue and working-at-height training is part of the job, not an add-on.
Certificate or college diplomaUtilities, energy, mining and resources
Solar photovoltaic installers mount panel arrays on roofs, frames, or ground structures and connect them through inverters into a building's electrical supply or the grid. The job combines roofing-style physical work with careful electrical and structural detail, since a poor penetration or a loose termination shows up years later. Final connection work is often reserved for a licensed electrician.
Short course or on-the-job trainingUtilities, energy, mining and resources
