Energy, utilities, nuclear, mining, and natural resources
Wind-turbine technician
Suite 150 · apt-150-wind-turbine-technician. Published A4A vertical slice with guided, mini, full, and reserve banks.
Official sourcesVerification pending
About this practice suite
This suite prepares candidates for wind-turbine technician selection in the energy, utilities, nuclear, mining, and natural resources sector with 5 skill areas: mechanical comprehension, electrical reasoning, safety judgment, technical reasoning and situational judgment. Every question was written by Novus editors for this suite — none are taken from live or leaked exams — and the full bank holds 52 scored questions across three modes, plus 8 reserve questions used to vary repeat attempts. Answer keys never ship to the browser: your answers are scored server-side, and results stay on your device.
Skills this suite practises
- Mechanical comprehension — Forces, motion, gears, pulleys, levers, fluids, pressure, and basic machines.
- Electrical reasoning — Basic circuits, current, voltage, resistance, symbols, and electrical troubleshooting.
- Safety judgment — Hazard recognition, safe sequencing, escalation, and risk controls.
- Technical reasoning — Applied technical principles, diagrams, tools, systems, measurements, and troubleshooting.
- Situational judgment — Evaluating workplace responses against role-relevant principles.
Sample questions from the guided bank
Two of the 10 guided-practice questions, shown exactly as they appear in a session. Answers and explanations are not printed here — keys stay on the server — so open guided practice to answer them and see how you did.
A wind-turbine technician primarily:
- A. Mines underground ore
- B. Designs national grids alone
- C. Pilots aircraft full-time
- D. Inspects, maintains, and repairs turbines including mechanical, electrical, and safety systems
Yaw error persists and cables twist near limit. What is best?
- A. Ignore twist counters
- B. Force yaw past soft limits
- C. Cut loop cables
- D. Follow untwist/yaw procedures; stop unsafe operation before cable damage
Practice modes and timing
Guided practice is untimed-feeling and instructional; the mini-test is a short timed check; the full simulation mirrors a complete sitting. All three draw on separate question sets, so moving up a mode never repeats what you practised.
| Mode | Questions | Duration | Start |
|---|---|---|---|
| Guided practice | 10 | 15 minutes | Open |
| Timed mini-test | 12 | 18 minutes | Open |
| Full simulation | 30 | 45 minutes | Open |
Study outline
Read the study outline for this suite’s skills, timings, and recommended lessons on one printable page, or download its standalone HTML file. The printable page can also be saved as a PDF from your browser.
- Guided practice
- Timed mini-test
- Full simulation
- Downloads pack
- Build mechanical comprehension
- Learn electrical reasoning
- Practice safety judgement